Technical details - Legend

Wallpaper labels contain all necessary regulatory and customer-related information. This information is commercially customary and easy to understand. The symbols of internationally recognized product approvals indicate a corresponding merchandise certificate.

Batch number contains information about:

  • Facility number
  • Current batch number
  • Level of compliance with the approved color of wallpaper samples (character A and B)
  • Shift number

The batch number allows the traceability of product manufacture.

ISO 9001 mark
The whole production process of the EDEM AG is subject to European quality standard ISO 9001.

Washability:

7_1Spongeable
No permanent washability is promised. During hanging, damp glue maybe wiped without visible damage from the face of the wallcovering with a damp sponge or cloth.

7_2Washable
Domestic dust and/or few water based stains maybe carefully removed with a damp cloth and soapy water from the wallpaper. Grease and solvent based stains will not be removable.

7_3Extra-washable
Domestic dust and/or few water based stains maybe carefully removed with a damp cloth and soapy water from the wallpaper. Grease and solvent based stains will not be removable. Some greasy stains might be removable if cleaning is started immediately after soiling.

7_4Scrubbable
Water-soluble stains can be removed with mild soap or a mild abrasive and sponge.

7_5Extra Scrubbable
Water-soluble stains can be removed with a mild abrasive and a soft or harder brush.

Color fastness to light:

7_6Moderate light fastness

7_7Satisfactory light fastness

7_8Good light fastness

7_9Very good light fastness

7_10Excellent light fastness

Vertical offset of the pattern:

7_11Free match
The pattern matches no matter how adjoining lengths are hung.

7_12Straight Match
The pattern is to be matched at the same height. The length of the repeat is also expressed as a number, e.g. 64cm.

7_14Reverse alternate lengths
The pattern is to be matched when joining lengths are hung reversed.

7_24Offset Match
The pattern matches when adjoining lengths are hung with longitudinal displacement. The amount of displacement is also expressed as a number, e.g. 64 / 32cm where 64cm is the pattern repeat: 32cm is the amount of the displacement.

Application:

7_15Paste the wallpaper
The paste is applied on the wallpaper’s backside.

7_16Paste the wall
The paste is applied on to the wall, not on the wallpaper’s backside.

7_17Pre-pasted
The wallpaper’s backside is pre-coated with paste to be activated with water.

Stripping methods:

7_19Strippable
The wallpaper can be stripped manually from the dry wall respectively dry ceiling without leaving residues and without damaging the surface.

7_20Peelable
The decorative or protective surface of the wallpaper can be removed in a dry state and manually from its backing. The backing remains as lining support on the surface where it was hung.

7_18Wet removable
The wallpaper has to be soaked with water or a proprietary stripping agent or by steaming and is scraped off with the a spatula.

Miscellaneous:

7_21Duplex Embossed
Top-quality embossed wallpaper in two paper layers. Embossment remains intact after hanging.

7_22Impact Resistant
Particularly hard-wearing wallcoverings with resilient coating.

7_23Overlap and double cut
Adjoining lengths are lapped and the two thicknesses are cut through with a straight edge and knife. The dispensable two strips of waste are pulled away leaving a perfect butt-joint.

7_25Low flammability
Low flammability according to DIN 4102